HLA QA 48 Inch 4,200 lbs. Pallet Forks
HLA QA 48 Inch Pallet Forks
4,200 Lbs. Capacity
Solid Tines
Adjustable side to side
Headache Rack
Related products
-
Lane Shark LS3 FEM
Manufactured in the panhandle of Florida, the original FEL mounted brush cutter designed for the compact to midsize tractor. American owned using American parts. Reduce the workload of clearing hunting lanes, roads, pond edges, underbrush, and much more. Forget the pole saws and ladders! With 11 cutting positions there's no job the Lane Shark Brush Cutter can't handle. Cut vertically, level with the ground, or 25°, 35°, & 45°. Fits most compact or midsize tractors with SSQA or the John Deere 400 & 500 series.Read more -
Ideal 6 foot Standard Duty Rotary Cutter
Model: RC6SDID Product Description: Rotary Cutter 72″ – Standard Duty, CAT 1 Tractor PTO Range (hp): 25-60 Hitch Category / Type: Category 1 / Cantilevered Cutting Width (in.): 72 Cutting Height Range (in.): 1.5 - 9 Cutting Capacity (in.): 2 Approximate Weight (lb.): 623 Blade count: 2 blades at 2″ wide Blade Carrier: Stump Jumper Tail Wheel: 16″ Laminated Driveline Protection: Shear Pin or Slip Clutch option Tractor PTO Speed (rpm): 540 Cutting Area Shielding: Belt and Chain Shielding Optional Warranty (gearbox): 5 YearsRead more -
York Model RW Rakes
The Model RW Landscape Rake is designed and built for a new breed of grounds maintenance tractors in the 20 to 35 horsepower range and is now Category '1' QUICK HITCH COMPATIBLE. Rugged welded steel construction and a choice of a 6, 7 or 8 foot working width make this unit a perfect work-mate with any tractor to handle a wide variety of soil-working jobs.Read more -
Lane Shark Hammerhead FEM
The Lane Shark Hammerhead is the only patented, hydraulically articulated, multi-position brush cutter for tractors with a minimum weight of 3,000lbs and a hydraulic flow range of 8.5-20gpm. Supported by a cutting diameter of 44”, the Hammerhead can tackle overgrown vegetation and cut the time spent on brush clearing jobs by more than half, and a wide range of cutting positions makes sure you get the job done right. Its cutting positions, which are vertical and offset from 25 to 55 degrees, enable it to easily maneuver around obstacles and reach difficult areas. Buy the Lane Shark Hammerhead brush cutter to simplify land management. *NOT COMPATIBLE WITH REAR REMOTES* **NOT COMPATBILE WITH SKID STEERS**Read more
