York Model TA1 & TA2 Rakes
The Model TA1 adds more workability to riding tractors, ATV’s & UTV’s. Designed for lawn and garden riding tractors, ATV’s & UTV’s of lower horsepower capacities. This four-foot Trailer-Type Rake may be drawn in three positions: straight across or angled to discharge material either to right or left. (1-7/8” Ball Hitch Compatible)
Related products
-
Lane Shark LS3 FEM
Manufactured in the panhandle of Florida, the original FEL mounted brush cutter designed for the compact to midsize tractor. American owned using American parts. Reduce the workload of clearing hunting lanes, roads, pond edges, underbrush, and much more. Forget the pole saws and ladders! With 11 cutting positions there's no job the Lane Shark Brush Cutter can't handle. Cut vertically, level with the ground, or 25°, 35°, & 45°. Fits most compact or midsize tractors with SSQA or the John Deere 400 & 500 series.Read more -
Farmi Skidder Winch W30R
<strong>**Currently Not Available**</strong> W30 R is a handy winch for small tractors (+15 hp), with a PTO shaft in a downward position. This sufficiently small winch helps you get a rotation axis angle that works. The smallest winch also has an upper pulley, dozer plate and a notched beam. Make sure to check the availability of the winch with our factory, as W30 R winches are manufactured in separate series. <h6><span style="color: #ffffff;">UTV, EV, Electric Vehicle, Utility Vehicle, Tractor, Mower, Snow Blower, Blade, Loader, Grapple, Backhoe, Tiller, Bush hog, Brush Hog, Rotary Cutter, Rough Cut, Box Blade, Box Scraper, FEM, Front End, Mower, Rake, Post hole digger, Vertical Auger, Skidder Winch, Kubota, Massey Ferguson, New Holland, Ford, John Deere, Mahindra, TYM, Bad Boy, MTD, Case, Cat, Caterpillar, Ventrac, Steiner, Steiner Turf, Lane Shark, LaneShark, York, Made in USA, Made in United States, Polaris, Can-Am, Honda, Vector, MASSIMO, Kawasaki, Yamaha, Landmaster, CF Moto, Bobcat, Ferris, Exmark, Cub Cadet, Ariens, Gravely, Husqvarna, Toro, Hustler, Dixie Chopper, Simplicity, Walker, Kohler, Briggs and Stratton, Vangaurd, Ranger, Kinetic, Utility, Woods, Wallenstein, Farmi, WR Long, Interstate, Battery, Batteries</span></h6>Read more -
Sale!
Featured MK Martin PRCPLUS96 HD 96″ Cutter
Hire
-
Day Rate
Original price was: $10,103.00.$9,355.00Current price is: $9,355.00. / Day
Model: PRCPLUS96 Product Description: Rotary Cutter 96" - Heavy Duty, CAT 1 & 2, Slip Clutch, Rubber Guards Tractor PTO Range (hp): 80 minimum Hitch Category / Type: Category 1 & 2 / Cantilevered Cutting Width (in.): 96 Cutting Height Range (in.): 2-10 Cutting Capacity (in.): 2 Gearbox Rating (hp): 100 Blade Tip Speed (fpm): 16,500 Approximate Weight (lb.): 1475 Blade Dimensions (in.): 3 blades at 1/2" x 3" Blade Carrier: Stump Jumper Tail Wheel: 2 wheels - 16" Laminated Driveline Protection: Slip-Clutch Decking: 3/16" Tractor PTO Speed (rpm): 540 Cutting Area Shielding: Belt Standard/Chain Shielding Optional Warranty (gearbox): 5 Years Additional Information: -Floating top link maintains cutting height - Bolt on skid shoes - Deck protection ring - Standard front and rear rubber guards.Read more -
-
Lane Shark Hammerhead FEM
The Lane Shark Hammerhead is the only patented, hydraulically articulated, multi-position brush cutter for tractors with a minimum weight of 3,000lbs and a hydraulic flow range of 8.5-20gpm. Supported by a cutting diameter of 44”, the Hammerhead can tackle overgrown vegetation and cut the time spent on brush clearing jobs by more than half, and a wide range of cutting positions makes sure you get the job done right. Its cutting positions, which are vertical and offset from 25 to 55 degrees, enable it to easily maneuver around obstacles and reach difficult areas. Buy the Lane Shark Hammerhead brush cutter to simplify land management. *NOT COMPATIBLE WITH REAR REMOTES* **NOT COMPATBILE WITH SKID STEERS**Read more
