8597 Main Street Campbell, NY 14821
1.607.527.8872 or 1.800.450.8872

Bob-cat - ProCat - 942501 / 942502 / 942504 / 942506

Want to cut up to 37 acres a day? You’ll definitely want to choose one of the options in our impressive PRO-CAT Series. From the ergonomically designed operator controls to the hinged foot plate that provides easy drive belt access, you’ll find features that will make all the difference.

Lifetime Warranty on Deck, Deck Cradle & Engine Deck
Heavy-gauge deck for durability
Molded rubber discharge chute that bounces back from hard knocks
Maintenance-free spindles and wheel bearings mean less down-time
Adjustable dampeners let YOU configure the level of dampening
Versa-FLO adjustable deck opening for cutting in all grasses and conditions; adjust up for Bahaia Grass, down for lush Blue Grass
Extreme Discharge System for superior clipping dispersal.
Anti-scalp rollers for superior contour mowing
Larger control levers and thicker grips for more comfort and less vibration
4-Point Full Suspension Seat comes Standard!
On-the-fly adjustable tracking controls
Quick Lift foot pedal to raise and lower deck on the go with ease
12V accessory outlet for MP3 player or cell phone
NEW Dual Warranty Option


Ignition - Electronic, electric start
Ergonomically designed, easy-access operator controls to reduce fatigue.
Larger control levers with thicker grips for more comfort and less vibration
Heavy Duty Donaldson-type air cleaner
Hydrostatic drive with dual 12cc variable displacement pumps and wheel motors.
Lever-type steering controls provide independent power to each wheel for moving, stopping and turning.
Adjustable dampeners mean you control the level of dampening
On-the-fly adjustable tracking controls
Standard 4 point full suspension seats for increased operator comfort.
52” or 61” Side Discharge High-productivity DuraDeck™ featuring BOB-CAT Extreme Discharge System (EDS).
Reinforced side and front deck lip
Versa-FLO adjustable deck opening for cutting in all grasses and conditions
Molded Rubber Discharge Chute
Adjustable cutting height from 1-1/ 2 to 5 inches in ¼ inch increments
Quick Lift Pedal
Strategically placed anti-scalp rollers deliver superior cut on undulating turf.
Large diameter self adjusting idlers
Maintenance Free Cutter Spindles and Caster Wheels


2-post folding Roll Over Protection Structure (ROPS) with seat belt
Tire - Knobby 23 x 10.50 -12 (2 required)
52" or 61" Deck striping kit
52" or 61" Mulch baffle kit
52” or 61" Widetrack kit
52” or 61” Mulching kit
Kit - ECO plate
Electric deck lift kit
ZT Hitch kit
BOSS-VAC PRO™ Collection System
Magnetic Light Kit

Fuel Capacity - 12 gal. (36 l)
Drive - Belt from engine to hydrostat input shafts; hydrostatic drive to wheels
Hydraulic Capacity - .65 gal. (2.5 L) capacity; oil cooler
Brakes - Hydro provides dynamic braking; drum type parking brake
Gauges and Controls - Hourmeter; throttle; choke; key switch; PTO clutch switch; steering and traction control arms; parking brake lever
Turning Radius - True zero-turning radius
Frame - Formed and welded steel frame rails

Front Casters

52" - (2) 13 x 5.00-6, 4-ply rated, tubeless
61" - (2) 13 x 6.50-5 4-ply rated, tubeless

Rear Drive

52.5" Deck - (2) 23 x 10.50-12, 4-ply rated, tubeless
61" Deck - (2) 24 x 12.00-12, 4-ply rated, tubeless

Cutting Decks

Cutting Width and Type

52" (1.33m) side discharge
61" (1.5 m) side discharge

Deck Construction - DuraDeck™ with Extreme Discharge System. Welded 10-gauge steel with 7-gauge reinforcements and side skirts, molded rubber discharge chute.
Spindles - Large diameter 6 bolt top-mounted, 1 in. (25 mm) dia. shaft on precision ground maintenance-free ball bearings
Drive - Belt from engine to center spindle; reinforced V-belt on split steel pulleys from center spindle to outboard spindles, 5.5 in. (140 mm) backside idler

Anti-Scalp Rollers

52.5 in. Decks - (6) 5 in. (127 mm), front and rear center, left and right front, left and right rear
61 in. Decks - (7) 5 in. (127 mm), (2) front center, left and right front, left and right rear, center rear

Productivity Rate / 8 Hours

52.5 in. Deck - Up to 27.1 acres at 8 mph
61 in. Deck - Up to 31.5 acres at 8 mph

Blades (3)

52.5 in. Deck - 18 in. (46 cm); .205 in. (5.2 mm) thick
61 in. Deck - 21 in. (53 cm); .25 (6.4 mm) thick


Length - 80 in. (2.03 m)


52.5 in. Deck - 64.5 in. (1.6 m) with chute down; 58.25 in. (1.4 m) with chute up
61 in. Deck - 73 in. (1.9 m) with chute down; 62 in. (1.6 m) with chute up

Overall Height 46.5 in. (1.2 m)


Cutter Spindle Type:
Maintenance Free w/ 1 Inch Shaft
Cutter Spindle Bearings:
Double Sealed Precison Ball Bearings
Cutting Height:
1 to 5.5 inches
Deck Lift Type:
Manual Foot Lift w/ Spring Assist/RH or LH Quick Lift Foot Lift Pedal
Deck Drive:
Warner Mag Stop 250 lb/ft Electric Clutch
Tractor Frame:
Welded Fabricated
Hydro-Gear Variable Dispacement Pumps - Hydraulic Oil Cooler - Parker Wheel Motors
Ground Speed:
0 11.5 mph (18.5 km/h) forward; 0 - 4 mph (6.4 km/h) reverse
Lever-type steering controls independent power to each wheel for moving, stopping and turning
Front Tires:
13 x 6.50-5 Pneumatic Castor Wheels
Rear Tires:
24 x 12.00-12, 4 Ply
Parking Break:
Fuel Capacity:
14 Gal.
Digital w/ Service Minder for Engine Oil & filter, Engine Air filter & Hydraulic Oil & Filter
Premium High Back w/ Extra Thick Foam & Elastomeric Sling For A Smooth Ride, Fore & Aft Adjusters, Quick Adjust Armrests
2 year/2000 hours or 5 year/500 hours (Lifetime Warranty on the Deck, Cradle & Engine Deck on Select Models)
Standard Features:
Four Point Micro-Adjustment Deck Leveling System. New One-Hand Height Selector Offers Fingertip Control. EPA Compliant Fuel System Includes 14 Gallon Tank For Fewer Refills. Tool-Free Engine Oil Drain Valve. Cutting Height Adjustments in 1/4 Inch Increments. New Control Livers Eliminate Lost Linkage Motion for Smoother Operation, Less Wheel Marking & Spin. Seat Platform Now 2 Inches Lower To Enchance Center of Gravity.
1,293 lbs.
Deck Size:
61 Inches
Kohler Cammand Pro CV740
Engine Lubricant:
Full Pressure - Spin-On Filter
Deck Design:
Duradeck Side Discharge Tunnel-Deck with Oversized Molded Rubber Chute. Fabricated, Two Layer Reinforcements 10-Gauge Plus 7-Gauge. Reinforced Front Lip & Side.
Deck Skirts:
7-gauge with adjustable anti-scalp rollers, front & rear

Bob-cat Financing


     SAVE UP TO $400 (depending on model) now through 3/31/19
          (Ask for more details)

2.99% for 36 Months OR 3.99% for 48 Months - NO Interest Until 3/1/19 & NO Payment Until 4/1/19 - $50 Customer Promo Fee ($50 Promo Fee for Business/Commercial Customers) - $1,500 Minimum Purchase/$50,000 Maximum Purchase (3.25% Participation Fee Required)


0% for 36 Months or 42 Months & 48 Months w/$0 Down Payment
Interest begins immediately, First Payment Due In 35 Days, $50 Customer Promo Fee ($150 Promo Fee for Business/Commercial Customers) - $1,500 Minimum for 36 month term and 48 month term. (3.25% Participation Required)


1.99% for 48 Months - Interest Begins Immediately, First Payment due in 35 Days.  $50 Customer Origination Fee, (3.25% Participation Fee Required)

3.99% for 60 Months - Interest Begins Immediately, First Payment Due in 35 Days. $50 Customer Origination  Fee ($150 Origination Fee for Business/Commercial Customers - $2,500 Minimum. (1.75% Participation Fee Required)

(ALL Financing Promotions Available Through 4/30/19)


Product Tags

©2019 Jim's Equipment Repair, Inc. -